LATICRETE® SELECT-BOND™ Non-Sag Kit
Find a Distributor
Caractéristiques et avantages
- Exceeds ANSI A118.4 EHT and ANSI A118.11
- Supports heavy tile and stone, reducing lippage problems.
- For interior and exterior floor and wall applications
- Build up to 3/4" (19 mm) without shrinkage or set-up time problems
- Superior Non-Sag performance on walls
- "Extra Heavy" rating per ASTM C627
Information sur le produit
The SELECT-BOND™ Non-Sag Kit is a component of the SELECT-BOND Adhesive System. The SELECT-BOND Non-Sag Kit is designed to be mixed with the SELECT-BOND Base Adhesive to provide superior non-sag performance for installation of tile and stone on walls.
SELECT-BOND Base Adhesive is a polymer modified tile and stone adhesive that can be used for both thin bed and Large Heavy Tile applications. Designed to be used alone or mixed with one of three optional SELECT-BOND Adhesive System Kits for additional performance enhancements – Non-Sag, Rapid and High Performance (ANSI A118.15). See individual product data sheets for each SELECT-BOND Adhesive Kit. When used alone (without additional SELECT-BOND Adhesive System Kits), SELECT-BOND Adhesive provides a one-step installation for ceramic tile, porcelain tile, marble and stone on floors and walls. Approved for use over exterior glue plywood for interior installations.
Fiches de données de produit
- DS-36581 English
Approbations, certifications et écologique
- SELECT-BOND Non-Sag Kit - HPD (English)
Fiches de données de sécurité
- SELECT-BOND Non-Sag Kit-SDS (English)
- SELECT-BOND Non-Sag Kit-SDS (français)
Information sur le marketing
- LATICRETE SELECT-BOND Brochure (English/Espanol)
- Adhesives Selection Guide (English / Español)
- Adhesives Selection Guide (français)
Fonctionnement
Watch Tips From Our Pros!
View tips for product installation, demonstrations, get project inspiration and more on our YouTube channel.
Training & Seminars
Sign up for our free 24/7 online training, or attend our hands-on Profit Through Knowledge (PTK) classes.